The Carbon Cub Kit is divided into three sub-kits. Each sub kit comes with everything needed to finish the job - from
nuts and bolts to double-sided adhesives & methamethacrylate bonding agent - you won’t have to go shopping for any
extra parts unless you choose to. Complete, step-by-step instructions with illustrations and photos are included with
each kit. The complete airframe should be ready to cover in only a few weeks.
FUSELAGE KIT
The fuselage kit includes a powder coated fuselage that is ready to attach parts to. The floorboards are gel-coated
composite parts that need no painting... they are ready to fit and install. You will install the rudder pedals, torque
tube, master cylinders and parking brakes on the floorboards, and then install the complete floorboard assembly to
the fuselage with 20 screws. The stringers are attached with extremely strong Methamethacrylate adhesive. They are
installed in a couple of hours. When the fuel system and control cables are installed the fuselage will be ready to go to
the cover shop...
Carbon Cub Fuselage Kit - $21,660
WING KIT
The wing kit includes everything needed to assemble the wings, flaps, ailerons, and fuel tanks. Every nut and washer,
screw and component part is in the kit. The only things you will need to provide are the fabric, covering supplies, and the
paint. The ribs are a three piece design that enable the builder to assemble the center sections with the spars prior to
attaching the nose ribs or trailing edge ribs. This allows the basic structure to support itself as the builder attaches the
various parts. The process is fast and easy. Leading edges are pre-bent, and attach to the ribs with pull rivets. There
are half as many parts in our wing as in a Piper design, and the build time is less than half because of the simplicity of
the design.
Carbon Cub Wing Kit - $21,660
FINISHING KIT
The finishing kit includes everything that doesn’t come in the first two kits, less the fabric, covering materials, paint,
the instruments, avionics, and the FWF. It includes: the engine cowl, engine mount, air induction, windows, control
cables, gel coated interior panels, seats with standard upholstery, standard shoulder harnesses and seat belts, boot cowl
components, firewall, flap handle and flap attaching components, instrument panel, landing gear system, tailwheel and
tail spring, 6:00 x 6 tires and tubes, fuel gages, and wing struts.
Carbon Cub Finishing Kit - $21,660
What is not included? With these three kits, you will have everything needed except FWF (the prop, engine, airbox, baffles,
exhaust, etc.), and what is in the instrument panel. We offer these components at a competitive cost as options. The covering
materials and paint are not included in our kits. Tools are not included.
You will save hundreds of hours of “shopping” time and the frustration of ordering small components that don’t fit, or don’t work
once you get them and try them. Our complete kits are engineered to go together quickly and if you use our recommended engine/
prop components, you will get the results and the performance you see in our demo aircraft. Everything included in our kits has
been tried and tested, fully compliant with the ASTM F2245-07 for building and certifying light aircraft.
The fuselage, landing gear, wing struts and all structural components have been tested to a design load of 4 Gs positive, and 2
Gs negative. In addition, we have taken these items to 6 Gs for the required 3 seconds to assure a 50% “ultimate strength”. Rest
assured that we have fully tested both the structural integrity and the flight characteristics of the Carbon Cub so you don’t have to
be a test pilot to know how the airplane will perform.
All prices, terms, included/optional equipment, and performance numbers are subject to change.
ORDERING INFO
A deposit equal to one-third of the total purchase price is required to place an order and secure a production position.
Balance due at time of shipment/pickup.
Kit price guaranteed at time of deposit.
For ease of review, please find below the printable deposit form. To place an order fill out and sign the deposit form, then email, fax or
mail back to CubCrafters.
For additional details, questions, or comments please contact us, at 509.248.9491 or via email sales@cubcrafters.com.